Flail Atv Mower With CE 13.5hp ATV Flail Mower With Adjustable Tires For Farm Garden Agriculture
Operation Safety
● Pay special attention when working with the machine not to touch fixed objects
such as walls, shafts, guard rails, tracks etc.This could cause the breakage of the blades,
which would be thrown out of the machine at very high speed.
● If wires, rope or chains should become entangled in the rotor, stop immediately
to prevent damage or dangerous situations; stop the mower and towing machine, take
out the starting key or safety cut-out.Put working gloves on;clear the rotor with the aid
of pliers or shears. Don't try to disentangle it.
● Do not use the machine when excessive vibration is experienced, as this may
cause breakage and serious damage-find the cause of the vibration and eliminate it
before using the machine again.
MODEL OPTIONS |
ATV FLAIL MOWER 120 |
ATV FLAIL MOWER 150 |
MODEL NUMBER |
ATV-FLM120 |
ATV-FLM150 |
Engine |
13.5HP Briggs & Stratton |
13.5HP Briggs & Stratton |
Start |
Electric & Pull start |
Electric & Pull start |
Wheels |
Side and rear operation |
Side and rear operation |
Safety Clutch |
Included |
Included |
Rear Gate |
Yes |
Yes |
Cutting Width |
1200mm/4ft |
1500mm/5ft |
Mower width with wheels on the side |
1750mm |
2050mm |
Mower width with wheels at the back |
1400mm |
1700mm |
Adjustable Cutting Height |
10 - 100mm |
10 - 100mm |
Deck Thickness |
4mm |
4mm |
Side Wall Thickness |
6mm |
6mm |
Number of Hammer Blades |
24 |
30 |
Number of Belts |
2 belts |
2 belts |
Colour |
Grey (optional) |
Grey (optional) |
Powder Coated |
Yes |
Yes |
Weight |
230kg |
310kg |
Shipment size |
190 x 85 x 50 |
220 x 85 x 50 |
Structural Warranty |
12 months |
12 months |
1, Flail mower to be used with ATV/UTV, small tractor, car, etc..
2, Cuts effectively the large (wild) grass fields or roadsides.
3, The Flail Mower features changeable blade types for different types of mowing jobs.
You do not need a Lawn Mower, a Field Mower, and Trail mowers.
Simply change the blades to the correct type for your job.
4, Easily adjustable cut height
5, Flexible wheel setup (3 different wheel positions)
6, With optional openable top flap for making it easier to release the grass in case of jam at the rotor.
It also makes it easier to replace the hammers/blades.
- 15 hp Briggs & Stratton 420 ccm 4-stroke one cylinder fuel engine.
- Electric and manual start.
- Centrifugal clutch pulley (automatic drive engagement and disengagement).
- Sturdy toothed belts.
- Adjustable wheels height.
- Automatic belt tensioner.
- 6mm, powder-coated, strong, durable, robust body.
- Electronically balanced rotor.
- Weight: 230kg.
- Fuel tank capacity: 6.1l.
- Cutting width: 120cm.
- Working speed: 2-10km/h.
- Front aluminum flaps – against projectiles.
- Rear grass discharge.
- Anti-scalp rear roller. (It eliminates scalping in challenging conditions)
- Standard 50mm tow ball swivel hitch.
- Grease nipples on the height adjuster, on the belt pulley, on the rotor and roller bearings for smoother work.
- The cutting height can be adjusted from 15mm to 260mm.
- Flexible wheel setup: wheels can be positioned either on lateral sides or on front.
- (Making it capable of working in restricted narrow areas).
- Fully adjustable drawbar with 3 points offset function (towable inline or offset).
- Suitable for use with any vehicle (ATV, UTV, small tractor, or Jeep).
- Working efficiency : 2150-2550m²/h.
- Either Y blades or forged and galvanized hammer blades are applicable.
- Y-blades - for rough cutting, thick grass fields, etc,
- T-blades (hammer blades) - for a smoother finish on lawn/grass available optionally.
- Equipped with y-blade by default for rough cutting
- (It provides advanced mulching capabilities in the case of long/dense vegetation.).
Cutting height can be easily adjusted to fit your mowing needs. Simply use the built-in rotating handle to raise or lower the cutting height to your desired need. Once set, the handle can be locked to ensure the height remains the same for an even cut.